Any mechanics on Kumb?

Advertise your business or service to fellow KUMB members with this Forum.

Moderators: Gnome, Rio, bristolhammerfc, the pink palermo, chalks

Post Reply
User avatar
Cockneyboy311
Posts: 11954
Joined: Thu Oct 08, 2009 1:23 pm
Location: Fascination Street
Has liked: 619 likes
Total likes: 502 likes

Any mechanics on Kumb?

Post by Cockneyboy311 »

Any of you lot fix motors? Or have had experience in renovating cars? Im especially interested if you have any experience with Triumph Stags.

Let me know!

Thanks

CB311
User avatar
The Old Man of Storr
Posts: 35210
Joined: Tue Jan 13, 2009 11:17 am
Location: Lost In the Recesses Of My Mind .
Has liked: 3238 likes
Total likes: 2305 likes

Re: Any mechanics on Kumb?

Post by The Old Man of Storr »

It's not the gear box is it ?
User avatar
Cockneyboy311
Posts: 11954
Joined: Thu Oct 08, 2009 1:23 pm
Location: Fascination Street
Has liked: 619 likes
Total likes: 502 likes

Re: Any mechanics on Kumb?

Post by Cockneyboy311 »

The Old Man of Storr wrote:It's not the gear box is it ?

I've no idea mate. Its not been on the road since 1998! Bodywork is fine, Engine looks ok but the insides are a right mess. Needs new seats etc. If you stick the key in it turns over. Thats about as much as i know.
User avatar
The Old Man of Storr
Posts: 35210
Joined: Tue Jan 13, 2009 11:17 am
Location: Lost In the Recesses Of My Mind .
Has liked: 3238 likes
Total likes: 2305 likes

Re: Any mechanics on Kumb?

Post by The Old Man of Storr »

Cockneyboy311 wrote:

I've no idea mate. Its not been on the road since 1998! Bodywork is fine, Engine looks ok but the insides are a right mess. Needs new seats etc. If you stick the key in it turns over. Thats about as much as i know.
You can get all sorts of car related stuff on ebay , gear boxes , doors etc .

I bought an engine online for my Mrs' Nissan Micra by typing in what I wanted on Google , then somewhere that can get in contact with scrap yards around the country came up , you type in your requirements and the scrappies get in touch with you and you choose the one you want .
I had a whole engine delivered from Dorset to Skye for £500 inc delivery , totally amazing .

There are specialists in doing up classic cars but most mechanics should be able to do what you want ,putting seats etc in.
Sorry I'm not a mechanic , all I know is that cars cost a fortune to upkeep .

Triumph Stags were notorious for dodgy gear boxes so watch out .
User avatar
swash
Posts: 3766
Joined: Tue Dec 15, 2009 10:30 pm
Location: Not enough middle fingers
Has liked: 155 likes
Total likes: 179 likes

Re: Any mechanics on Kumb?

Post by swash »

it's the Fetzer valve
User avatar
The Old Man of Storr
Posts: 35210
Joined: Tue Jan 13, 2009 11:17 am
Location: Lost In the Recesses Of My Mind .
Has liked: 3238 likes
Total likes: 2305 likes

Re: Any mechanics on Kumb?

Post by The Old Man of Storr »

Try going on' Car and Classic co.uk ' , you might find what you want there .
User avatar
Los Martillos
Posts: 6473
Joined: Mon May 23, 2005 8:20 pm
Location: Coggeshall
Total likes: 1 like

Re: Any mechanics on Kumb?

Post by Los Martillos »

Check out the TV prog Wheeler Dealers. They did one up a couple of years back. Can't remember what they did - but I think they made quite a profit
User avatar
Greatest Cockney Rip Off
Posts: 19402
Joined: Tue Dec 02, 2003 12:29 am
Location: The oil drum in the Garden of England
Has liked: 324 likes
Total likes: 685 likes
Contact:

Re: Any mechanics on Kumb?

Post by Greatest Cockney Rip Off »

Stags are usually money pits mate, like most Triumph cars. A fella I used to work with used to have a TR6 and spent literally thousands on it. Carbs and electrics were notoriously unreliable.

Must admit, the Stag does sound nice when tuned and running but be warned, its gonna cost.
User avatar
Johnny Byrne's Boots
Posts: 34222
Joined: Mon Jun 05, 2006 5:19 pm
Location: Care home dodger
Has liked: 2182 likes
Total likes: 2479 likes

Re: Any mechanics on Kumb?

Post by Johnny Byrne's Boots »

Stags were notorious for overheating and warping the cylinder heads. Many owners gave up on the Triumph engine and replaced it with the Rover V8.
User avatar
Cockneyboy311
Posts: 11954
Joined: Thu Oct 08, 2009 1:23 pm
Location: Fascination Street
Has liked: 619 likes
Total likes: 502 likes

Re: Any mechanics on Kumb?

Post by Cockneyboy311 »

I just want somebody who knows what they are doing to give it a once over and tell me how much it will cost to get it back on the road. I know about the engines and this one has the original one in it. It looks in great nick tbf. I messaged a mate earlier who's Dads got a garage so I'm hoping he'll be able to help. It was my Grandads car (god rest his soul) so I'd really like to get it up and running if I could. If it's going to cost a bomb (which I suspect it might) then I'll have to reluctantly sell it.

Thanks for all your replies btw :thup:
User avatar
bobbymooresbracelet
Posts: 5339
Joined: Sun Jun 24, 2012 11:17 pm

Re: Any mechanics on Kumb?

Post by bobbymooresbracelet »

Scrap it.
User avatar
Johnny Byrne's Boots
Posts: 34222
Joined: Mon Jun 05, 2006 5:19 pm
Location: Care home dodger
Has liked: 2182 likes
Total likes: 2479 likes

Re: Any mechanics on Kumb?

Post by Johnny Byrne's Boots »

If it's the interior that needs doing, this lot are by no means cheap but are very good and won't rip you off. They come highly recommended on my Merc forum.
User avatar
hammerdivone
Posts: 22276
Joined: Mon Jul 26, 2004 1:55 pm
Location: Somewhere between here and reality

Re: Any mechanics on Kumb?

Post by hammerdivone »

swash wrote:it's the Fetzer valve
I reckon it may be missing the phalange
User avatar
Maroonmachine
Posts: 2073
Joined: Thu Oct 06, 2005 9:16 am

Re: Any mechanics on Kumb?

Post by Maroonmachine »

The original engine will spontaneously combust at circa 60,0000miles, FACT.
User avatar
Iron-worx
Posts: 5288
Joined: Tue Aug 16, 2011 12:44 pm
Location: Rebuilding Lady Garrets Tower

Re: Any mechanics on Kumb?

Post by Iron-worx »

You need to be either flushed or pretty well mechanically clued up for classic car ownership because there's always something or another with them.

In the last year I've done the following on mine: Complete rebuild of brake calipers, brake drums, brake master cylinder, clutch master and slave cylinders, strip down and rebuild of carburettor, replace gearbox rear oil seal, renew track rod end ball joint covers, renew track control arm ball joint covers, replace front offside wheel bearing, plus normal maintenance which is much much more than on a modern car. In the near future I need to replace the slip yoke and the differential pinion oil seal.

There's always something along those lines needing doing, it never stops, and unless you're in a position to pay out a fortune for others to do them then you need to be able to do them yourself.

If you're in neither of those positions then you're not suited to classic car ownership.
User avatar
Cockneyboy311
Posts: 11954
Joined: Thu Oct 08, 2009 1:23 pm
Location: Fascination Street
Has liked: 619 likes
Total likes: 502 likes

Re: Any mechanics on Kumb?

Post by Cockneyboy311 »

Iron-worx wrote:You need to be either flushed or pretty well mechanically clued up for classic car ownership because there's always something or another with them.

In the last year I've done the following on mine: Complete rebuild of brake calipers, brake drums, brake master cylinder, clutch master and slave cylinders, strip down and rebuild of carburettor, replace gearbox rear oil seal, renew track rod end ball joint covers, renew track control arm ball joint covers, replace front offside wheel bearing, plus normal maintenance which is much much more than on a modern car. In the near future I need to replace the slip yoke and the differential pinion oil seal.

There's always something along those lines needing doing, it never stops, and unless you're in a position to pay out a fortune for others to do them then you need to be able to do them yourself.

If you're in neither of those positions then you're not suited to classic car ownership.

I appreciate your honesty IW :thup:
User avatar
Whitters
Posts: 6837
Joined: Thu Jan 08, 2004 4:14 pm
Location: On the Lake Geneva shoreline
Has liked: 108 likes
Total likes: 112 likes

Re: Any mechanics on Kumb?

Post by Whitters »

To save starting a new thread, does anyone know anything about brake fluid? I need to top mine up and the manual says to use DOT4 ISO 4925 class 6 standard fluids, but all I can find in my local stores here in Switzerland is DOT4 ISO 4925 class 4

Is this ok to use??? I don't want to wreck my brakes, or worse have a nasty crash.
User avatar
prince_huggy
Posts: 7617
Joined: Thu Jun 30, 2005 2:30 pm
Has liked: 45 likes
Total likes: 16 likes

Re: Any mechanics on Kumb?

Post by prince_huggy »

Need some advice re: a new car.

I'm still in my 14-day grace period and I started to notice a knocking noise. (Long story as to why I hadn't noticed on my test drive) So, took it back and said this needs to be sorted before my 14 days is up. Nothing wrong with that, they have found what it is and will repair it. The thing is, it's the clutch and flywheel that need replacing.

Now, do I cut my losses and say no thank you to the car or would this be the only problem with it? The car is only 2 years old and has 37,000 miles on the clock
User avatar
prince_huggy
Posts: 7617
Joined: Thu Jun 30, 2005 2:30 pm
Has liked: 45 likes
Total likes: 16 likes

Re: Any mechanics on Kumb?

Post by prince_huggy »

Just realised, I dug this up from 11 years ago :crossed:
Post Reply